A lot of 24 new aluminum circuit board enclosures.
The enclosures are cut 4 inches long from the Extrusion Technologies RS-5010 extrusion. They are powder painted beige/putty color and come with screws, 48 blank end panels, and 48 punched end panels. Half of the punched end panels have one 0.5 inch D hole for BNC, one DB-9 cutout, one DB-25 cutout, and one 0.4 inch hole for 2.1 or 2.5 mm power jack. The other 24 punched end panels have four 0.5 inch D holes, 4 0.2 inch LED holes, and one 0.4 inch hole for 2.1 or 2.5 mm power jack. The end panels have black silk-screened legends which can be scraped off, or panel can be turned around to hide the legends. The enclosures have top and bottom slots for 5.0 in. wide x 4.0 in. long circuit boards. The enclosures weigh about 8 ounces each. For more information on the extrusions see http://www.extrutech.com/



   

 

 

 

 

 

If this is your post, and you need to mark this as taken or delete it, we can send you a reminder email with links to do this.

    Cancel